Regulation
20 January 2027: physical AI meets the new EU machinery law before its standards do
70 days. That's how long physical AI makers have from today, 11 November 2026, until the EU Machinery Regulation applies on 20 January 2027.
Which harmonised standards will a robot be presumed to meet on that day? Under the new Regulation, none so far.
Article 20(1) sets the rule. It speaks of harmonised standards "the references of which have been published in the Official Journal of the European Union". A product that conforms with them "shall be presumed to be in conformity" with the essential health and safety requirements in Annex III "covered by those standards or parts thereof". No published reference means no presumption.
On 6 August 2026 the Commission answered a question from Parliament, E-002354/2026. It plans to re-cite most of the standards now listed under the old Machinery Directive. Their adoption and citation in the Official Journal are "planned for the fourth quarter of 2026". On cybersecurity and AI it was blunt:
Such new standards have not yet been delivered by the ESOs.
The answer calls the cyber-safety standard a priority. The Commission "expects the ESOs to offer it soon".
Then came a twist for robot makers. On 4 September 2026 the Commission adopted Implementing Decision (EU) 2026/2015. It added EN ISO 10218-1:2025 and EN ISO 10218-2:2025, the industrial robot safety standards. It added them in support of Directive 2006/42/EC, the old law. The same Decision sets an end date for the old list.
Implementing Decision (EU) 2023/1586 is repealed with effect from 20 January 2027.
So the Commission cited the newest robot standards under a law with 70 days to run. I searched EUR-Lex on 29 October. I found no act citing harmonised standards under Regulation 2023/1230.
Does that block the market? Not by itself. The Commission's answer says "it is possible to comply with the EHSRs, without harmonised standards being applied." A cited standard gives presumption. It isn't mandatory.
Where it bites is the route to the CE mark. Article 25 sets it by category.
| Product | Route under Article 25 | With no cited standard or common specification |
|---|---|---|
| Not listed in Annex I | Internal production control (module A) | Still allowed. You argue every requirement yourself |
| Annex I Part B, for example protective devices that detect people (item 15) or safety logic units (item 17) | Module A only if harmonised standards or common specifications cover all relevant requirements | A notified body: module B with C, H or G |
| Annex I Part A, items 5 and 6: safety components, or embedded systems, with self-evolving behaviour using machine learning to ensure safety functions | Always a notified body | Unchanged. Third party anyway |
A robot cell lives on light curtains, scanners and safety logic. Those sit in Part B. Without a cited standard, their makers can't self-declare.
The AI rules are a separate clock. I covered that in Who checks what the AI commands. The cyber-safety side was in part 5 of the last series.
Here's the honest limit. The Q4 citation may still land before 20 January. It could appear the week this post goes out. My EUR-Lex check is from 29 October, not today. I read the Commission's answer, not the standardisation request behind it. And re-citing old standards says nothing yet about which parts will cover the new requirements.
Bottom line: the Machinery Regulation applies on 20 January with or without its list. Without the list, your technical file carries the full weight.
Robot makers shipping to the EU in January: which standards will your declaration of conformity cite?
Part 2 of 12 · The Survey: what keeps physical AI safe in 2026.
Sources
- European Parliament — Answer given by Executive Vice-President Séjourné on behalf of the Commission, E-002354/2026, 6 August 2026 (read 29 October 2026)
- European Parliament — Question for written answer E-002354/2026, 9 June 2026 (read 29 October 2026)
- EUR-Lex — Commission Implementing Decision (EU) 2026/2015 of 4 September 2026, OJ L 7 September 2026 (read 29 October 2026)
- EUR-Lex — Regulation (EU) 2023/1230, consolidated text of 27 July 2026, Articles 20, 25, 54 and Annex I (read 29 October 2026)
Cite this
APA
Melchior, M. (2026, November 11). 20 January 2027: physical AI meets the new EU machinery law before its standards do. Physical AI Safety. https://physical-ai-safety.com/blog/machinery-regulation-standards-not-cited
BibTeX
@misc{melchior2026machinery,
author = {Melchior, Mati},
title = {{20 January 2027: physical AI meets the new EU machinery law before its standards do}},
howpublished = {Physical AI Safety},
year = {2026},
month = nov,
date = {2026-11-11},
url = {https://physical-ai-safety.com/blog/machinery-regulation-standards-not-cited}
}- Published